1. Choose the appropriate chassis ambient light
Before installing chassis ambient lighting, you need to purchase the appropriate lighting fixtures. The ambient light of the chassis is usually composed of LED lights, because LEDs have the characteristics of low power consumption, high brightness, and long life. At the same time, choose appropriate colors and lighting effects according to personal preferences, such as colorful gradients, flashes, etc.
2. Prepare tools and materials
Before powering on, you need to prepare the following tools and materials:
① SUV EV chassis ambient light set: including required LED lights, control modules, etc.
②Cable sleeves and cable ties: used to organize and protect cables.
③Wire strippers and insulation strippers: used to process wires.
3. Determine the installation location
Before turning on the power, you need to determine the installation location of the chassis environment light. Generally speaking, the space around the chassis is relatively spacious, so you can choose a suitable location for installation. Make sure the light is securely mounted to avoid friction with other EV parts.
4. Install lamps
According to the instructions provided by the chassis environment light group, follow the steps to fix the LED light on the chassis. Supplied fixings such as screws, glue or clamps can be used. Make sure the light fixture is securely installed and will not become loose or fall off.
5. Electrical connection
Before connecting the power supply, make sure the battery of the SUV EV has been disconnected to prevent short circuit or electric shock. Then follow these steps to wire:
① Find the power interface of the SUV EV: Generally speaking, you can choose the positive or corresponding power interface of the
Electric Car battery.
② Connect the positive and negative cables: Use wire strippers and insulation wire strippers to connect the positive and negative cables of the chassis ambient light to the positive and negative power supplies of the
Electric car respectively. Make sure the connections are secure and secure the wiring with cable ties and cable sleeves.
③Test the power supply: After the connection is completed, you can reconnect the battery and test whether the light is working properly. If everything is working correctly, the light should come on and flash or fade according to the preset effect.
6. Adjustment and fixation
Once you confirm that the chassis ambient light is working properly, you can adjust the brightness and effect of the light as needed. Then, make sure the cables and control module are securely secured to the chassis using cable ties, clamps, or other fixtures to avoid loosening or pooling of water.